Skip To Page Content

How to Replace Swimming Pool Light

Replacing a swimming pool light is a doable task that, with proper guidance, can be accomplished relatively quickly. The process involves several steps, each important for a safe and effective light replacement.

The estimated time for this project can be anywhere from 30 minutes to 2 hours, making it a reasonable DIY task for people with intermediate skills. The estimated cost is around $35, making it an affordable project that contributes to maintaining a well-lit and enjoyable pool environment.

Before You Start the Pool Light Replacement

Before plunging into (pun intended) the replacement process, it is absolutely necessary to prioritize safety. Identifying and turning off the circuit breaker that powers the pool light cannot be skipped because it prevents the risk of electrocution. This precaution ensures a secure working environment, allowing for a smooth and hazard-free replacement process.

Swimming Light Replacement Tools

The tools and materials required for this task include a 6-in-1 screwdriver, a replacement bulb, a wedge kit (if necessary), a housing gasket, and paper towels. These items and proper safety measures form the foundation for a successful pool light replacement.

First Step of Replacing the Pool Light

First, and I’m repeating it – turn off the circuit breaker that powers the pool light. Create a protective barrier by identifying and deactivating the circuit breaker that controls the pool light and ensure that the light remains inactive and poses no electrical hazards. This step protects the person performing the replacement and mitigates potential risks associated with water and electricity.

Second Step

The second step involves the necessary task of removing the pool light housing from the pool wall. This process requires the extraction of exterior screws securing the housing. The point of this step is to disengage the housing from the pool structure and facilitate access for the next steps.

While detaching the housing, examine it for buoyancy. Its buoyancy is an easy and obvious way to check the housing’s watertight integrity. If the housing floats as expected, no water is inside, and the bulb failure is not due to housing leaks.

In the opposite situation, a lack of buoyancy means water within the housing. This condition is commonly associated with bulb malfunction and indicates the importance of this step in diagnosing potential issues and guiding further replacement actions.

Third Step

Inspecting the gasket for damage is the third phase. A damaged gasket should be replaced for a watertight fit. The process starts with the opening of the light housing.

It requires a careful approach and demands dry hands and cautious handling to avoid introducing moisture into the housing. This step is pivotal in the replacement procedure because it exposes the internal components, including the bulb and associated elements. The insistence on maintaining dry conditions is crucial since moisture entering the housing can lead to eventual bulb failure due to the extreme heat generated during operation.

Also, the inspection of the gasket is most important at this point. The gasket is a crucial sealing component. It goes through scrutiny to detect any signs of damage or wear.

The presence of cracks or missing pieces in the gasket means a replacement. This detailed examination lines up with the broader objective of maintaining the housing’s integrity.

Fourth Step

In the fourth step, the focus shifts to replacing the old bulb with a new one. Utmost care is emphasized to ensure the optimal performance and longevity of the new bulb. A critical consideration is the avoidance of any contact between the bulb and oils or liquids.

This precaution is taken to prevent potential issues that could compromise the functionality of the bulb after it has been installed. A dry paper towel is recommended for gently handling the new bulb. It will minimize the risk of introducing foreign substances that might impede its performance.

The important thing about this step is the seamless integration of the new bulb into the housing. The action taken to protect the bulb’s integrity and functionality is equally important.

Replacement of Swimming Pool Light: Final Step

Once the housing is back in the water and shows buoyancy, it can be securely screwed back into the pool wall. This final step involves the careful re-installation of the pool light housing. After this, it will be the end of the entire replacement process.

The secure attachment of the lens to the housing takes a collar and screwdriver to ensure a snug and watertight connection. This is why the role of the gasket was so important. With any damaged gaskets replaced, optimal performance is guaranteed.

When the housing demonstrates buoyancy, it can be secured back onto the pool wall. Execute the final act of screwing the housing into place with precision. Now, your well-sealed pool lighting system enhances the pool’s aesthetics and functions properly again.

When to Call A Professional

While this is a DIY-friendly project, there are instances when calling a professional is advisable. If, when identifying the breaker, corrosion or damage is observed, seeking professional help is recommended to ensure safety and proper functionality. The same goes for the housing as well.

Wrapping Up

Whether changing a pool light bulb or upgrading the entire lighting system, we hope this step-by-step guide empowers you to take on the task of how to replace a swimming pool light. Safety is the top priority, and calling a professional is recommended in specific situations if you have difficulty identifying the breaker or find corrosion or damage during the process. This guide provides a thorough resource to enhance your swimming experience with a well-maintained and well-lit pool.

Polar Pool & Spa Would Love to Help You

Polar Pool & Spa is a reliable ally in scenarios like pool light replacement, and we can ensure a smooth and secure process. First and foremost, our experienced technicians prioritize safety by following detailed procedures. Our professionals possess the insight to assess buoyancy and swiftly identify any water ingress that might compromise the light’s functionality.

We handle the delicate phases with precision throughout the entire replacement process. We exercise caution when opening the light housing, making sure our hands are dry. We carefully inspect the gasket to prevent moisture infiltration.

The delicate task of replacing the old bulb with a new one is executed with the utmost care, avoiding any contact that might impact the bulb’s performance. The re-installation of the housing is approached with attention to detail. Our experts guarantee a secure reassembly, utilizing a collar and screwdriver to affix the lens to the housing and confirming a watertight fit with a well-maintained gasket.

By choosing Polar Pool & Spa, clients benefit from a team dedicated to maintaining the integrity of their pool lighting system. We prioritize the aesthetics of a well-lit pool and the safety and functionality that come with a carefully replaced and well-sealed lighting setup. Our commitment extends beyond the immediate task, offering peace of mind and the assurance of a reliable and expertly managed pool environment.

Posted on by Polar Pool and Spa
How to Replace Swimming Pool Light

Comments are closed.

Explore Other Posts



Pin it